Table of Contents
Advertisement
G
Hold down the [Gl] button on the left side of the print-head carriage for 10 seconds to flush ink
from the print head.
IMPORTANT
Do not hold down the buttons for more than 10 seconds.
The ink storage, which is located on the upper side of the print head, runs out of ink. This allows air to enter the ink tube,
causing ink discharge failure or decreased printing quality.
H
Clean the Gl print head nozzle surface using new cleaning sticks impregnated with cleaning liquid.
IMPORTANT
• Wipe off the cleaning liquid completely.
• Never rub the nozzle surfaces hard.
G
I
Repeat steps
and
IMPORTANT
• Do not hold down the buttons for more than 10 seconds.
The ink storage, which is located on the upper side of the print head, runs out of ink. This allows air to enter the ink tube,
causing ink discharge failure or decreased printing quality.
H
to clean the print head Wh.
Maintenance Before the Start of Operations
: Area to clean
2.Maintenance
85
Advertisement
Table of Contents
