Table of Contents
Advertisement
Maintenance Before the Start of Operations
E
Clean the K and C print head nozzle surfaces using new cleaning sticks impregnated with cleaning
liquid.
IMPORTANT
• Wipe off the cleaning liquid completely.
• Never rub the nozzle surfaces hard.
F
Repeat steps
IMPORTANT
• Do not hold down the buttons for more than 10 seconds.
The ink storage, which is located on the upper side of the print head, runs out of ink. This allows air to enter the ink tube,
causing ink discharge failure or decreased printing quality.
• Wipe off the cleaning liquid completely.
• Never rub the nozzle surfaces hard.
84
D
E
and
to clean the print heads M and Y.
2.Maintenance
: Area to clean
: Area to clean
Advertisement
Table of Contents
