COBHAM EXPLORER 727 Getting Started page 7

Enter the PIN
NOTE: The below procedure is only needed if the SIM card for your terminal requires a PIN.
You can enter the PIN from the IP Handset or from a computer with a browser accessing the
built-in web interface. For information on how to access the web interface, see Access the
EXPLORER 727 web interface on page 6.
To enter the PIN from the IP Handset, do as follows:
1. Connect the IP Handset to the terminal.
The IP Handset automatically starts up.
2. Select the BGAN menu.
3. If the PIN has not yet been entered in
the terminal, select ENTER PIN.
Note that this menu item is not
available if the PIN has already been
entered nor if the use of PIN is disabled.
If you are not sure, select
Status > PIN status from the BGAN
To enter the PIN from the web interface, do as follows:
1. Connect a PC to the terminal using the
LAN interface.
2. Start your Internet browser.
3. Enter the IP address of the terminal web
interface in the address field.
The EXPLORER 727 terminal now starts to establish a connection to the BGAN network.
Connect to the BGAN network
After connecting the antenna to the terminal and starting up the EXPLORER 727 terminal,
the antenna starts searching for a BGAN satellite signal. When the PIN is entered, the
EXPLORER 727 terminal attempts to register on the BGAN network.
The Antenna indicator shows the status as follows: (for information on the other
indicators on the EXPLORER 727 terminal, see the User manual)
Indicator pattern
Green flashing
Green constant
Orange constant
Red constant
menu to see if the PIN has been
accepted.
4. Type in the Administrator name and
password for the terminal.
The default Administrator name is
admin and the default password is
1234
5. Type in the PIN and confirm with the
center key.
The default IP address is http://
192.168.0.1. If the PIN has not yet been
entered in the terminal, the web
interface will now prompt you for a PIN.
4. Type in the PIN and click OK.
The antenna is booting or performing a sky scan.
The antenna is tracking and is ready for use.
Temporary malfunction – user action required.
Antenna error (see the User manual)
Meaning
5