Safety Instructions; Symbols - Bosch Rexroth VT-MSFA1 Operating Instructions Manual

6/28 Bosch Rexroth AG
About this documentation

1.3.1 Safety instructions

In this documentation, safety instructions are indicated whenever sequences of
actions are explained which bear the danger of personal injury or damage to prop-
erty. The measures described for the hazard avoidance must be observed.
Safety instructions are set out as follows:
SIGnAl wORD
Type and source of danger
Consequences in case of non-compliance
Measures for the hazard avoidance
f
• warning sign: Draws attention to the danger
• Signal word: Identifies the degree of danger
• Type and source of danger: Specifies the type and source of danger
• Consequences: Describes the consequences in case of non-compliance
• Precautions: Specifies how the danger can be prevented
Table 2: Risk classes according to AnSI Z535.6-2006
warning sign, signal word
DAnGER
wARnInG
CAUTIOn
NOTICE

1.3.2 Symbols

The following symbols indicate notices which are not safety-relevant but increase
the comprehensibility of the documentation.
Table 3: Meaning of the symbols
Symbol Meaning
If this information is not observed, the product cannot be used and/
or operated optimally.
Individual, independent action
f
1. Numbered instruction:
The numbers indicate that the steps must be carried out one after
2.
the other.
3.
VT-MSFA1 | RE 30260-B/07.12
Meaning
Indicates a dangerous situation which will cause death
or severe personal injuries if not avoided.
Indicates a dangerous situation which may cause death
or severe personal injuries if not avoided.
Indicates a dangerous situation which may cause minor
or medium personal injuries if not avoided.
Damage to property: The product or the environment
could be damaged.