1 About this documentation
This documentation is valid for plug-in switching amplifier VT-SSV from Bosch
This documentation is intended for fitters, operators, service technicians, system
operators and machine manufacturers.
This documentation contains important information on the safe and appropriate
installation, transport, commissioning, operation, use, maintenance, and removal
of the product.
▶ Read this documentation thoroughly, especially Chapter 2 "Safety instructions"
▶ The product must not be commissioned until you have been provided with the
Tabelle 1: Required and supplementary documentation
Plug-in switching amplifier type VT-SSV-1-2X/
In order that this documentation allows you to work directly and safely with your
product, standardized safety notes, symbols, terms, and abbreviations are used.
For a better understanding, they are explained in the following sections.
In this documentation, safety instructions precede a sequence of activities
whenever there is a risk of personal injury or damage to equipment. The hazard
avoidance measures described must be observed.
Safety instructions are structured as follows:
Type and source of danger
Consequences in case of non-compliance
▶ Hazard avoidance measures
• Warning symbol: draws attention to a hazard
• Signal word: identifies the degree of hazard
• Type and source of danger: Specifies the type and source of danger
About this documentation | Plug-in switching amplifier VT-SSV
VALIDITY OF THE DOCUMENTATION
and Chapter 3 "General notes on damage to property and damage to the
product", before working with the product.
REQUIRED AND SUPPLEMENTARY DOCUMENTATION
documentation marked with the book symbol
observed it. The documentations can be found on the product site or at www.
REPRESENTATION OF INFORMATION
RE 30262-B, Edition 05.2022, Bosch Rexroth AG
and you have understood and