Designations; Safety Instructions; General Information On This Chapter; Intended Use - Bosch Rexroth VT-MSFA1 Operating Instructions Manual

7/28 Bosch Rexroth AG

Safety instructions

1.3.3 Designations

The following designations are used in this documentation:
Table 4: Designations
Designation Meaning
VT-MSFA1 Booster amplifier
UB Operating voltage
2 Safety instructions
2.1

General information on this chapter

The booster amplifier was designed and manufactured according to the generally
accepted code of practice. However, there is still the danger of personal injury
and damage to property if you do not observe this chapter and the safety instruc-
tions in this documentation.
Read this documentation completely and thoroughly before working with
f
the product.
Keep this documentation in a location where it is accessible to all users at
f
all times.
Always include the required documentation when you pass the product on to
f
third parties.
Only operate the VT-MSFA1 booster amplifier in a technically immaculate
f
condition and as intended, in a safety- and risk-conscious manner, consider-
ing these instructions.
In case of faults impairing the safety and modifications to the operating behav-
f
ior, shut down the VT-MSFA1 immediately and report the faults to the respon-
sible personnel.
2.2

Intended use

The VT-MSFA1 boost amplifier is an electrical component.
You may use the product as follows:
• To control hydraulic on/off valves which have to be switched quickly.
• To create the clocked solenoid current for the on/off valves released according
to the data sheet.
The product is only intended for professional use and not for private use.
Intended use includes having read and understood this documentation complete-
ly, especially the chapter 2 "Safety instructions".
2.3

Improper use

Any use deviating from the intended use is improper and thus not admissible.
VT-MSFA1 | RE 30260-B/07.12