About This Document; General Safety Instructions - Bosch Rexroth LT353 Manual

3 609 929 B46/2008-09 | LT353/LT354/LT355
1

About this document

This manual contains important information
on the safe and appropriate assembly,
transport, commissioning, operation,
maintenance, disassembly, and simple
troubleshooting of the LT353/LT354/LT355
servo amplifier (in the further text referred to
as LT35x).
Read these instructions completely,
especially chapter "2 General safety
instructions" on page 17, before working
with the LT35x servo amplifier.
Related documents
The LT35x servo amplifier is a system
component.
Also observe the instructions for the other
system components.
Also observe the generally applicable, legal
or otherwise binding regulations of European
or national legislation and the rules for the
prevention of accidents and for
environmental protection applicable in your
country.
2 General safety
instructions
The LT35x servo amplifier has been
manufactured according to the accepted
rules of current technology. There is,
however, still a danger of personal injury or
damage to equipment if the following general
safety instructions and the warnings before
the steps contained in these instructions are
not complied with.
• Read these instructions completely and
thoroughly before working with the LT35x
servo amplifier.
• Keep these instructions in a location where
they are accessible to all users at all times.
Bosch Rexroth AG
• Always include the operating instructions
when you pass the LT35x servo amplifier
on to third parties.
Intended use
The LT35x servo amplifier is a component in
terms of the machine directive 98/37/EC and
is not a ready-for-use machine. The product
is exclusively intended for being integrated in
a machine or system or for being assembled
with other components to form a machine or
system. The product may be commissioned
only if it is integrated in the machine/system
for which it is designed and the machine/
system fully complies with the EC machine
directive. Observe the operating conditions
and performance limits specified in the
technical data.
The LT35x servo amplifier is a work appliance
and not designed for private use.
Intended use includes having read and
understood these instructions, especially the
chapter "2 General safety instructions".
The LT35x servo amplifier is intended for
installation in the BT 356 card rack or the
SB 35 x system box.
Improper use
Any use of the LT35x servo amplifier other
than described in chapter "Intended use" is
considered as improper.
17/84