Table of Contents
Advertisement
24/28
Bosch Rexroth AG
Disposal
11.2 Disassembling the VT-MSFA1
Disassemble the booster amplifier from the top hat rail as shown in chapter "As-
sembly", fig. 5 on page 18.
The plug-in screw connector is disassembled as shown in fig. 8 on page 22.
11.3 Preparing the components for storage/further use
Proceed as follows in order to prepare the VT-MSFA1 for storage and further use:
Only use the original packaging for storage.
f
Comply with the admissible storage temperature range specified in RE 30260.
f
Protect the booster amplifier from dust and humidity.
f
12 Disposal
12.1 Environmental protection
Careless disposal of the VT-MSFA1 and the packaging material could lead to
environmental pollution.
Thus, dispose of the VT-MSFA1 and the packaging material in accordance with
f
the national regulations in your country and recycle the material, if possible.
13 Extension and modification
The VT-MSFA1 booster amplifier must neither be extended nor converted. If you
convert the VT-MSFA1, warranty will expire.
14 Troubleshooting
14.1 How to proceed for troubleshooting
• Always work systematically and targeted, even when under time pressure. Ran-
dom, thoughtless disassembly and changing of settings can, in the worst-case-
scenario, result in the inability to determine the original error cause.
• First get a general idea of how your product works in conjunction with the over-
all system.
• Try to find out whether the product has worked properly in conjunction with the
overall system before the error occurred first.
VT-MSFA1 | RE 30260-B/07.12
Advertisement
Table of Contents
