Table of Contents
Advertisement
8/28
Bosch Rexroth AG
Safety instructions
The installation or use of inappropriate products in safety-relevant applications
could result in unintended operating conditions when being used which in turn
could cause personal injuries and/or damage to property. Therefore please only
use a product for safety-relevant applications if this use is expressly specified and
permitted in the documentation of the product. For example in explosion protec-
tion areas or in safety-related parts of control systems (functional safety).
Bosch Rexroth AG does not assume any liability for damage caused by improper
use. The user assumes all risks involved with improper use.
Improper use of the product includes:
• Using the booster amplifier outside the specified performance limits and operat-
ing conditions and in particular the specified environmental conditions.
2.4
Qualification of personnel
The activities described in this documentation require basic knowledge of electrics
and hydraulics as well as knowledge of the appropriate technical terms. In order
to ensure safe use, these activities may only be carried out by a corresponding
expert or an instructed person under the direction and supervision of an expert.
Experts are those who can recognize potential dangers and apply the appropriate
safety measures due to their technical training, knowledge and experience, as
well as their understanding of the relevant provisions pertaining to the work to be
undertaken. An expert must observe the relevant specific professional rules.
2.5
General safety instructions
• Observe the valid regulations on accident prevention and for environmental protection.
• Observe the safety regulations and provisions of the country where the product
is implemented/used.
• Exclusively use Rexroth products in technically perfect condition.
• Observe all notices on the product.
• Persons who assemble, operate, disassemble or maintain Rexroth products
must not consume any alcohol, drugs or pharmaceuticals that may affect their
ability to react.
• Only use accessories and spare parts approved by the manufacturer in order to
exclude hazards to persons due to unsuitable spare parts.
• Comply with the technical data and environmental conditions specified in the
product documentation.
• The installation or use of inappropriate products in safety-relevant applications
could result in unintended operating conditions when being used which in turn
could cause personal injuries and/or damage to property. Therefore please only
use a product for safety-relevant applications if this use is expressly specified
and permitted in the documentation of the product.
• Do not commission the product until you can be sure that the end product (for ex-
ample a machine or system) where the Rexroth product is installed complies with
the country-specific provisions, safety regulations and standards of the application.
VT-MSFA1 | RE 30260-B/07.12
Advertisement
Table of Contents
