Taylor-Dunn TC-030-60L Operation, Maintenance, And Replacement Parts Manual page 29

Chapter -
TABLE OF CONTENTS
Inspect the Front Wheel Bearings and
King Pin ......................................... 2
Adjust Front Wheel Bearings
(used bearings) .............................. 2
Adjust Front Wheel Bearings
(new bearings) ............................... 3
Align Front Wheels ............................ 3
Front Hub, Steering knuckle, King Pin 4
Disassembly ....................................................... 4
Reassembly ........................................................ 4
Replace Front Wheel Bearings .......... 5
Replace the Steering Cylinder ............ 5
Rebuild the Steering Cylinder ............. 5
Replace Ball Joint .............................. 5
Hardware Torque ............................... 6
Illustration shows axle from TC-30-
60. The TC 30-60L axle is the same
with the exception of the steering
arm (14) shown to the right.
4