Drive Axle Service - Taylor-Dunn TC-030-60L Operation, Maintenance, And Replacement Parts Manual

Maintenance, Service, and Repair

DRIVE AXLE SERVICE

The information on the following pages was provided by the axle manufacturer.
This section covers two drive axle configurations:
• TA268 - Primary reduction is ring and pinion gears with planetary gear
• TA267 - Primary reduction is a nose reduction gear box with ring and
OMSI Drive Axle
Drive Axle
Page 6
hubs for secondary reduction. Equipped with drum brakes.
pinion gear secondary reduction. Equipped with disc brakes.
TA268 Drive Axle
Service information for the OMSI drive axle is in
manual M7-001-41 and can be found on the CD
included with your vehicle.
Additional Manuals may be purchased through your
local Taylor-Dunn® distributor. A service manual order
form is available on the vehicle CD.
TA267 Drive Axle