3. Tape the plug to the top of the cap so that it is available for reinsertion if the projector is to be
transported in the future.
Alternatively, order a new plug in the Reservoir Cap service kit (P/N: 003-200638-XX).
4. Close the projector case.
Technical support
Technical support for Christie Cinema products is available at:
•
Support.cinema@christiedigital.com
•
+1-877-334-4267
•
Christie Professional Services: +1-800-550-3061 or NOC@christiedigital.com
Preparing CP22XX and CP42XX Projectors for Initial Use Instruction Sheet
020-103515-01 Rev. 1 (04-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
Preparing CP22XX and CP42XX Projectors for Initial Use
2