Motor Pulley - Power Fist 8699159 User Manual

V4.1
2. Align the mounting hole in the Pulley
Cover with the mounting hole in the
Body Frame (#93).
3. Secure the Pulley Cover to the Band Saw,
using one Screw (#89), Spring Washer
(#7) and Flat Washer (#8).
SPINDLE PULLEY AND

MOTOR PULLEY

1. Slide the Spindle Pulley (#99) fully onto the Spindle Shaft (#97). Secure
the Spindle Pulley to the Spindle Shaft
using one Screw (#52).
2. Insert the Shaft Key (#51) in the slot on the
Motor Shaft. Align the slot in the Motor Pulley
(#105) with the Shaft Key. Slide the Motor
Pulley fully onto the Motor Shaft. Secure the
Motor Pulley to the Motor Shaft using one
Screw (#52).
INSTALL THE V-BELT
1. Loosen the Bolt (#108) and press the Motor
(#115) toward the Body (Fig. 8).
2. Place the V-Belt (#100) around the top
grooves in the Spindle Pulley (#99) and
Motor Pulley (#105 [Fig. 7]).
3. Adjust the Motor's position until the
V-Belt's tension will only allow you to push
it in 1/2 an inch with your thumb at the
midpoint between the pulleys.
4. Retighten the Bolt to secure the Motor in place.
IMPORTANT! Always securely close the Lid on the Pulley Cover after
installing a V-Belt or adjusting the cutting speed.
Visit www.princessauto.com for more information
4-1/2 in. Metal Cutting Band Saw 8699159
6-1
Fig. 6
Fig. 7
Fig. 8
15