Advertisement
gps get_data dd
>> POSITIONING ( 14.8s )
c) When GPS is positioned well, this command can show UTC value, Latitude, Longitude and the
last positioning time.
Example:
To get GPS RAW Data directly from SONY CXD5603GF without any conversion.
gps get_data raw
>> RAW UTC( 2017/11/23 06:57:16 ) LAT( 2459.3351 N ) LONG( 12118.4978 E ) POSITIONING( 0.8s )
To get GPS DD (Decimal Degree) data
gps get_data dd
>> DD UTC( 2017/11/23 06:59:06 ) LAT( 24.988825 N ) LONG( 121.308326 E ) POSITIONING( 2.9s )
gps get_data dms
To get GPS DMS (Degree Minute Second) data
>> DMS UTC( 2017/11/23 06:59:51 ) LAT( 24*59'1990" N ) LONG( 121*18'2992" E ) POSITIONING( 4.6s )
d) When GPS is not able to positioning by GPS signal is gone, it would tell GPS is not able to
position.
Example:
gps get_data dms
>> gps_not_positioning
(More demonstration examples, please refer to chapter 4.4)
3.3.9 gps sleep <Switch> <Sleep_Level>
<Switch>: A string representing whether the Sony GPS chip inside S76G/S78G will enter sleep/deep
sleep mode or not, the string can be on or off.
<Sleep_Level>: To decide which sleep mode S76G/S78G will enter, the value of <Sleep_Level> can be
0 (Sleep Mode) or 1 (Deep Sleep Mode).
S76G/S78G Commands Set Reference
Product Name
Version
v1.6.5
Doc No
Date
July 2, 2018
Page
57 of 73
Advertisement
