Advertisement
To quickly start using S76G/S78G EVB, the 1
PC/NB via micro USB port. The next step is checking whether the UART-To-USB bridge IC driver
can be properly installed on PC/NB. By using win7/win10, the UART-To-USB bridge IC driver
could be installed automatically and shows a USB serial com port after connecting well between
EVB and PC/NB via USB cable.
After successful installation of USB driver, you can use any terminal program (suggesting free
terminal software: termite) to connect to EVB. The commands set can be used through the
terminal program.
By using
termite
or other terminal software, be aware of not being appended nothing in the
end of a UART string (Figure 2.3).
st
step is using USB cable to connect EVB to
Figure 2.3
S76G/S78G Commands Set Reference
Product Name
Version
v1.6.5
Doc No
Date
July 2, 2018
Page
11 of 73
Advertisement
