Advertisement
<Format>: it follows "gps set_format_uplink" command input format. (raw/ipso/kiwi/utc_pos)
<Satellite_System>: it follows "gps set_satellite_system" command input format. (gps/hybrid)
Example:
gps get_mode
>> off hot 20 3000 ipso gps
3.3.8 gps get_data <Type>
<Type>: a string representing type of how CXD5603GF returns the UTC and coordinates and
positioning time, it can be raw, dd or dms.
Purpose: When GPS is running at "Manual" mode by setting "gps set_mode manual", user can get
GPS related data by this command.
Response:
a) There are several kinds of responses after entering this command. When GPS is not initialized yet
or entered GPS IDLE mode.
Example:
gps get_data dd
>> gps_not_init
gps set_mode manual
>> Ok
gps set_mode idle
>> Ok
gps get_data dd
>> gps_in_idle
b) When GPS starts to position but not positioned well yet, it would just return the spending time
when GPS is positioning
Example:
S76G/S78G Commands Set Reference
Product Name
Version
v1.6.5
Doc No
Date
July 2, 2018
Page
56 of 73
Advertisement
