AcSiP S76G Command Reference Manual page 37

>> 9
3.2.48 mac get_downcnt
Response: downlink counter that will be used at next transmission. Default: 0
Purpose: Get downlink counter that will be used at next transmission.
Example:
mac get_downcnt
>> 5
3.2.49 mac get_class
Response: class type of LoRaWAN, it can be A or C. Default: A
Purpose: Get class type of LoRaWAN
Example:
mac get_class
>> A
3.2.50 mac set_tx_mode <Cycle>
<Cycle>: A string representing TX signal would be sent continuously or not, it can be cycle or
no_cycle.
Response: Ok, if <Cycle> string is valid.
Invalid, if <Cycle> string is not valid.
Purpose: no_cycle mode means no any TX signal would be sent after joining, user needs to send TX
signal manually by "mac tx" command; cycle mode allows TX signal keep running, but the TX interval
is assigned by other duty cycle related command.
Example:
mac set_tx_mode no_cycle
>> Ok
3.2.51 mac get_tx_mode
Response: A string representing TX signal would be sent continuously or not, it can be cycle or
no_cycle.
Purpose: See "mac set_tx_mode" command.
Example:
mac get_tx_mode
>> cycle
3.2.52 mac set_batt <Battery>
TM
.
S76G/S78G Commands Set Reference
Product Name
Version
v1.6.5
Doc No
Date
July 2, 2018
Page
36 of 73