AcSiP S76G Command Reference Manual page 27

3.2.12 mac set_power <Power>
<Power>: a decimal string representing transmitting power in dBm, it can be 2, 5, 8, 11, 14, 20
(non-915 band); 30, 28, 26, 24, 22, 20, 18, 16, 14, 12, 10 (915 band); 17, 16, 14, 12, 10, 7, 5, 2 (470
band)
Response: Ok, if <Power> string is valid
Invalid, if <Power> string is not valid.
Purpose: Set transmitting power.
Example:
mac set_power 14
>> Ok
3.2.13 mac set_dr <Datarate>
<DataRate>: a decimal string representing data rate used for LoRaWAN, it can be from 0 to 6. (US915
is limited from 0 to 4; CN470 is limited from 0 to 5)
Response: Ok, if <DataRate> string is valid
Invalid, if <DataRate> string is not valid.
Purpose: Set uplink's data rate used for LoRaWAN
Example:
mac set_dr 0
>> Ok
3.2.14 mac set_adr <State>
<State>: a string representing whether ADR is on or off.
Response: Ok, if <State> string is valid
Invalid, if <State> string is not valid.
Purpose: Set the state of ADR.
Example:
mac set_adr on
>> Ok
3.2.15 mac set_txretry <RetryCount>
<RetryCount>: a decimal string representing retry number of transmission, it can be from 0 to 255.
Response: Ok, if <RetryCount> string is valid
Invalid, if <RetryCount> string is not valid.
TM
.
S76G/S78G Commands Set Reference
Product Name
Version
v1.6.5
Doc No
Date
July 2, 2018
Page
26 of 73