Advertisement
On means 400ms limit and off means no limit.
Response: Ok, if <UplinkDwell> string is valid.
Invalid, if <UplinkDwell> string is not valid.
Default value is off.
Purpose: Set UplinkDwell defined in LoRaWAN
size of each uplink DR. The command is only useful in when firmware is running at AS923 band.
Note: Only useful for AS923.
Example:
mac set_uplink_dwell on
>> Ok
3.2.59 mac get_uplink_dwell
Response: A string representing the current UplinkDwell setting for AS923 band, it would be on or
off.
Purpose: See "mac set_uplink_dwell" command.
Example:
mac get_uplink_dwell
>> off
3.2.60 mac set_downlink_dwell <DownlinkDwell>
<UplinkDwell>: A string representing DownlinkDwell defined in LoRaWAN
off. On means 400ms limit and off means no limit.
Response: Ok, if <DownlinkDwell> string is valid.
Invalid, if <DownlinkDwell> string is not valid.
Default value is off.
Set DownlinkDwell defined in LoRaWAN
size of each downlink DR. The command is only useful in when firmware is running at AS923 band.
Note: Only useful for AS923.
Example:
mac set_downlink_dwell on
>> Ok
3.2.61 mac get_downlink_dwell
Response: A string representing the current DownlinkDwell setting for AS923 band, it would be on or
off.
TM
v1.0.2. UplinkDwell would affect maximum payload
TM
v1.0.2. DownlinkDwell would affect maximum payload
S76G/S78G Commands Set Reference
Product Name
Version
v1.6.5
Doc No
Date
July 2, 2018
Page
39 of 73
TM
v1.0.2, it can be on or
Advertisement
