AcSiP S76G Command Reference Manual page 26

Response: Ok, if <DevAddr> string is valid
Invalid, if <DevAddr> string is not valid.
Purpose: Set Device Address used for LoRaWAN
Example:
mac set_devaddr 12345678
>> Ok
Note: This assigned DevAddr would be stored into EEPROM immediately after it is changed. No need
to use "mac save" command to store it, and it would NOT be changed to default value by "sip
factory_reset" command.
3.2.10 mac set_nwkskey <NwkSessionKey>
<NwkSessionKey>: a 16-byte hexadecimal string representing Network Session Key used for
LoRaWANTM.
Response: Ok, if <NwkSessionKey> string is valid
Invalid, if <NwkSessionKey> string is not valid.
Purpose: Set Network Session Key used for LoRaWAN
mac set_nwkskey 703af95b0ea9194771f82f3794ccf18f
>> Ok
Note: This assigned NwkSKey would be stored into EEPROM immediately after it is changed. No need
to use "mac save" command to store it, and it would NOT be changed to default value by "sip
factory_reset" command.
3.2.11 mac set_appskey <AppSessionKey>
<AppSessionKey>: a 16-byte hexadecimal string representing Application Session Key used for
LoRaWANTM.
Response: Ok, if <AppSessionKey> string is valid
Invalid, if <AppSessionKey> string is not valid.
Purpose: Set Application Session Key used for LoRaWAN
Example:
mac set_appskey 262f196d3510eeb304c2a8896545a36d
>> Ok
Note: This assigned AppSKey would be stored into EEPROM immediately after it is changed. No need
to use "mac save" command to store it, and it would NOT be changed to default value by "sip
factory_reset" command.
TM
.
TM
. Example:
TM
.
S76G/S78G Commands Set Reference
Product Name
Version
v1.6.5
Doc No
Date
July 2, 2018
Page
25 of 73