Advertisement
<bandID> - a decimal string representing band number, it can be from 0 to 15
<downlink frequency> - downlink frequency of specified channel in Hz.
Invalid, if <ChannelId> string is not valid.
Purpose: Get the uplink frequency, maximum & minimum DR, dc band and downlink frequency of a
specified channel.
Example:
mac get_ch_para 0
>> 868000000 0 5 0 0
3.2.43 mac get_ch_status <ChannelId>
<ChannelId>: a decimal string representing channel number, its value range depends on different
regional band (e.g. EU868 range falls in 0 to 15; US915 range falls in 0 to 71).
Response: on or off, state of specified channel.
Invalid, if <ChannelId> string is not valid.
Purpose: Get state of specified channel. on means the channel is enabled, and off means the
channel is disabled.
Example:
mac get_ch_status 0
>> on
3.2.44 mac get_dc_ctl
Response: state of duty cycle, on or off.
Default: off
Purpose: Get state of duty cycle checking. "on" means the checking is enabled, and "off" means the
checking is disabled.
Example:
mac get_dc_ctl
>> on
3.2.45 mac get_dc_band <BandID>
<BandID>: a decimal string representing band number, it can be from 0 to 15.
Response: <duty cycle>, if <BandID> is valid.
<duty cycle> - duty cycle of specified band, it can be from 0 to 65535.
0: means 0%.
1-65535: duty cycle is equal to 1/<duty cycle>.
Invalid, if <BandID> string is not valid.
S76G/S78G Commands Set Reference
Product Name
Version
v1.6.5
Doc No
Date
July 2, 2018
Page
34 of 73
Advertisement
