3.3.24. Injection nozzle
•
Install the dust seal with its round por-
tion facing downward.
•
Mount a seal ring on the seal ring
seating surface of the nozzle tube and
assemble nozzle holder assembly
with the stud bolt with the nozzle pipe
installing direction facing outward.
Engine model
DE12T/TI/TIA
DE12TIS
•
Be sure to follow the specified torque.
Torque
3.3.25. Cooling water pipe and thermostat
•
Install the water pipe onto the cylin-
der head.
•
Insert the thermostat in the housing.
•
With socket head bolt, install the
thermostat housing onto the water
pipe.
3.3.26. Oil cooler
•
Install the oil cooler onto the oil cool-
er cover.
•
Carefully apply the gasket to prevent
oil leakage.
•
Do not damage the gasket and install
the cover onto the cylinder block.
•
Connect a connection pipe between
the water pump and oil cooler.
Seal ring
1 mm
3 mm
1.0 kg . m
- 91 -
EAMD105I
EQM3084I
EAMD106I
REASSEMBLY