Timing Gear Case Cover; Idle Gear; Fuel Injection Pump Drive; Cylinder Head Cover - Daewoo DE12T Manual

3.1.21. Timing gear case cover

•
Disassemble the oil seal using an oil
seal removing jig.
•
Remove the cover fixing bolts and
disassemble the cover from the tim-
ing gear case.

3.1.22. Idle gear

•
Unscrew the idle gear fixing bolts and
disassemble the thrust washer and
idle gear.
•
Disassemble the idle gear pin using a
rubber hammer to prevent damage to
them.

3.1.23. Fuel injection pump drive

•
Remove the dowel pin for the steering
pump.
•
Unscrew the injection pump drive
shaft bearing housing fixing bolts and
remove the injection pump drive
assembly in which the shaft, gear,
bearings, and housing are put togeth-
er.

3.1.24. Cylinder head cover

•
Unscrew the cover fixing bolts and
disassemble the cover.
•
Keep the bolts in an assembly state
so that the gaskets and washers may
not be lost, and keep the cover gasket
as assembled with the cover.
DISASSEMBLY
- 54 -
EAMD025I
EAMD027I
EAMD028I