Daewoo DE12T Manual page 114

Caution :
The injection lines are designed for high operating pressures and should thus be handled
with particular care.
•
When mounting the pipes to the engine take care of good fitness.
•
Do not bend pipes to permanent deformation (not for replacing the nozzles either).
•
Do not mount any heavily bent pipes.
•
Avoid bending the pipes at the ends by more than 2 to 3 degrees.
In case of faults in the injection system which might have resulted in excessive operating pressures,
not only the failed part but also the injection line has to be replaced.
MAINTENANCE AND CARE
- 110 -