Daewoo DE12T Manual page 82

•
Semi-tighten a bolt at both sides of
the crankshaft, apply engine oil to
journals and pins, then assemble the
crankshaft with the cylinder block by
tightening the fixing bolts.
•
Install the oiled thrust washers with
the oil groove facing outward.
•
Install the bearing and thrust washers
to the bearing cap and apply oil to the
bearing and thrust washers.
•
Install the bearing cap by matching
the cylinder block No. with the bearing
cap No.
REASSEMBLY
7 6
- 78 -
EAMD077I
2
5 4 1
3
EAMD078I