c. Install the nozzle holder body (1) onto the
plate with the cap nut side facing downward.
d. Assemble adjusting shim (10), secondary
spring (11), and spring seat (12) on the noz-
zle holder body in the order as described.
NOTE :
The secondary spring is the same one as
the primary spring.
e. Assemble the pin (14), lift piece (13), and
spacer (15) with the nozzle holder body.
f. Install the pin (16) and nozzle (A) onto the
spacer.
1
MAINTENANCE OF MAJOR COMPONENTS
- 141 -
12
11
10
15
14
13
A
16
EQM4031I
EQM4032I
EQM4033I
EQM4034I