JDS Uniphase HST-3000 Testing Manual page 12

2. Repeat
3. Dial
4. Converse
5. Disconnect Call
6. Repeat
Repeat step 1 for the desired numbers in your call plan. Numbers may
include the following:
• Toll Free number
• Local off-network number
• Local on-network number
• Long Distance number
• International number
• Blocked Call
• 211 (community services)
• 311 ( municipal government services, non-emergency )
• 411 (directory assistance)
• 511 (traffic information or police non-emergency services )
• 611 (customer service)
• 711 ( TDD relay for the deaf)
• 811 (underground public utility location)
• 911 (emergency services)
Using the HST-3000 Speed soft key, select the first entry in the dial plan
and press OK. Press OK again to dial. The HST-3000 sends an
INVITE message to set up the call. Call status is displayed in the VoIP
Phone results screen. Verify that you hear a ring back tone before the
call is connected.
Talk to the called party and verify that voice quality is good for a period
of at least 15 seconds.
Press the OK key to disconnect the call
Repeat steps 3 through 5 for all numbers in the Speed dial list.
Technical Support tac@jdsu.com
Page 12 of 14
1 866 228-3762