JDS Uniphase HST-3000 Testing Manual page 5

Sip trunk
Hide thumbs Also See for HST-3000:
Table of Contents

Advertisement

4.
Configure Ethernet
5.
Configure VoIP
Technical Assistance Center
Press the LAN soft key and configure your test as follows. Leave all other
values at factory default settings, unless specified in the Work Order.
Menu
Option
IP Mode
IP Address
Net Mask
Gateway
Which MAC
LAN
Media Type
VLAN,
VLAN ID,
VLAN Priority
Press the Configure Navigation key again to launch the VoIP test
application. Press the General and Proxy soft keys and configure settings
as follows. Leave other values at default, unless specified in Work Order:
Menu
Option
VOIP Mode
CC
Standard
Alias
General
Outbound
Alias
SIP Vendor
100 Rel
Usage
Proxy
Mode
Address
Type
Proxy IP
Proxy Port
Proxy
Call Control
Port
Proxy
Username
Proxy
Password
Value
Comment
See Work Order
DHCP or Static
See Work Order
Enter Source IP Address for the PBX
See Work Order
Enter Subnet Mask for the PBX
See Work Order
Enter LAN IP Address for the SBC
Factory Default
Set to same value as SBC LAN port.
See Work Order
Select "Auto-select" if SBC LAN Port is
set to "Autonegotiate".
See Work Order
Value
Comment
Terminate
SIP
For Registering Trunks enter Phone Number
for the PBX.
For Non-Registering Trunks enter as follows:
Phone#@SBC LAN IP Address; user=phone
i.e. "8608635180@169.254.20.1;user=phone"
Notes:
Use third softkey to toggle between
See Work Order
"Keypad:123" for numerical entry
(including ".") and "Keypad:abc" for text
entry (including "@", ";" and "=").
Press "1" seven times to enter "@"
Press "*" once to enter "."
Press "*" four times enter ";"
Press "#" eleven times to enter "="
Alternately, a standard USB Keypad may
be connected to the HST-3000 USB port.
For Registering Trunks select "Dial by Phone
See
Number".
For Non-Registering Trunks select "Dial by
Comment
Name/URI/Email"
Standard SIP
Disabled
For Registering Trunks select "Static"
See Comment
For Non-Registering Trunks select "No Proxy"
IP Address
See Work Order
SBC LAN IP Address
See Work Order
Enter 5060 if not specified
5060
See Work Order
See Work Order
tac@jdsu.com
Page 5 of 14
855-ASK-JDSU

Advertisement

Table of Contents
loading

Table of Contents