Table of Contents
Advertisement
USE YOUR CP960 PHONE WITH A PC
When connected to the PC, the phone acts as a speaker and microphone during calls.
From your phone, you can manage the audio from calls or media played on your PC and answer calls from
MaX UC.
CONNECT THE PC TO THE PHONE
+
Connect the phone to a PC using a micro USB cable. (not included)
When the phone is idle the phone screen will look like this:
SET THE CP960 AS PC AUDIO DEVICE
By default, the PC automatically selects the connected CP960 as the audio device. You may need to connect it manually.
SET THE PHONE AS PC AUDIO DEVICE VIA PC
+
On your PC: Click START > CONTROL PANEL > SOUND.
+
Click ECHO CANCELLING SPEAKERPHONE (Yealink CP960 Speakerphone) and click SET AS DEFAULT DEVICE.
+
Click MICROPHONE (Yealink CP960 Speakerphone) and click SET AS DEFAULT DEVICE.
+
Click OK.
SET THE PHONE AS PC AUDIO VIA MaX UC
+
Navigate to TOOLS > OPTIONS > AUDIO.
+
Select CP960 for both Microphone and Speakers.
+
Optional: Select TEST to test your microphone or speaker.
PLACE CALLS VIA PC
If you have the MaX UC Desktop application, you can place calls and the phone acts as a microphone and speaker.
Before you begin, make sure you have set your phone as the PC audio device.
PROCEDURE
+
Make or answer a call on the installed softphone on your PC.
+
The microphone is automatically activated on your Yealink Speakerphone.
+
End the call on the Softphone.
+
The phone will continue to function as a speaker for the PC.
Need support? Connect with us at
Dial
4357 (HELP)
or
315-671-6262
www.northland.net/support
to speak to a Northland Training Representative
15
or
Advertisement
Table of Contents
