Ferno SA-3BLP-01 Care & Use Manual page 21

REQUIREMENTS WHEN USING AN L.P. CYLINDER TYPICAL NATURAL GAS & BULK L.P. HOOK-UP
IN THE ENCLOSURE
When using a propane tank, an integral means of
limiting the movement of the L.P. gas cylinder is
required inside of the enclosure. Lateral movement
must not exceed 1 inch when installed in the
retention device, and the L.P. cylinder must not
become dislodged when a lateral force of equal
weight to the cylinder is applied from any direction
at the center of the highest portion of the cylinder.
The retaining device MUST NOT interfere with the
operation of the L.P. cylinder valve, and there can
be no movement that results in strain to rigid
tubing or pipe and hose connections, and any hose
or tubing must not be installed in a way that results
in contact with the body of the grill.
TYPICAL PROPANE HOOK-UP
Page | 21