Record A Chase - SHOWTEC ColorCue 4 User Manual

Table of Contents

Advertisement

ColorCue 4
Note:
If a PLAYBACKS button (01)–(48) is not free and has a scene assigned to it, the LED on the button will be on.
04) Press the RECORD button (60) once again to store the scene. The LED on the button will turn off.
05) Clear the programmer.

Record a Chase

A chase is a sequence of steps. Each step is a static scene.
01) Create a scene:
Double (24-fixture) mode – follow steps 3–8 from 6.6.1. Create a Scene in Bank A on page 21. The
concept of Bank A and Bank B is not applicable in programming mode. Therefore the
connected fixtures can be selected only with the FIXTURES buttons and faders (01)–(24).
Single (48-fixture) mode – follow steps 3–8 from 6.6.4. Create a Scene on page 23.
02) Press the RECORD button (60) to start recording. The LED on the button will light up.
03) Press one of the PLAYBACKS buttons (01)–(48) to which you want to assign the chase. The LED on
button will start blinking.
Note:
If a PLAYBACKS button (01)–(48) is not free and has a scene assigned to it, the LED on the button will be on.
04) Make sure that the parameter selection mode is enabled.
05) Set the chase parameters: direction, speed and fade. See 6.7.3. Chase Parameters on page 26 for
more information.
06) Press the RECORD button (60) to record the step. The LED on the button will light up.
07) Repeat steps 1 and 6 to create the next step in the chase.
08) Continue repeating steps 1 and 6 to create all steps in the chase.
09) Press the RECORD button (60) to finish recording. The LED on the button will turn off.
Notes:
Make sure you wait 1 second before you press the RECORD button (60) to finish the recording in
step 9. As the last step from recording a scene (see step 6 above) is pressing the RECORD button (60),
you need to wait 1 second before pressing the button again to finish the recording.
One chase can have up to 100 steps. The maximum number of steps for all recorded chases is
limited to 1000 steps in total.
10) Clear the programmer.
Product code: 50706
25
Fig. 20

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ColorCue 4 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

50706

Table of Contents