GEA DairyRobot R9500 Operation Manual page 72

Maintenance
Safety instructions for maintenance
Special risks involved in maintenance work:
● Serious damage to property might occur if incorrect replacement or wearing
parts are installed.
● If energy sources are switched on unintentionally, this may lead to serious
bodily injury or damage to property.
● Electronic components may be damaged by electrostatic processes.
On completion of the maintenance work, check that:
● The installation values set before the work was performed have not been
changed by the work (see settings report).
● all screwed connections that were loosened earlier have been tightened.
● All safety devices, guards, tank covers, etc. that were removed previously have
been put back correctly.
● All safety equipment is working perfectly again.
● Have all of the tools, materials and other equipment that were used been
removed from the working area again?
● Operation has been checked after maintenance work has been completed or
parts replaced. Produce a full test report if necessary.
72 / 100
Note
Only touch the edge of the printed circuit board and avoid static caused for
example by clothing.
7821-9001-005
01. October 2019