To Call Up The Program - GEA DairyRobot R9500 Operation Manual

Sample data export

To call up the program

6.1 To call up the program
6.1.1 Sample data export for Germany (DE)
The sample data export is started on the herd management PC.
If the HM-D program module has been purchased (not obligatory for exporting
sample data but necessary for importing milk control results, exporting control
messages, etc.):
● Call
("Datenaustausch",
Deutschland" ["Data exchange", LKV
connection Germany"].
● Start the application DPMiko.
If it is not in the DPMenu, start the program DPMiko.exe directly from the DairyPlan
installation folder with Windows Explorer or set up a link to DPMiko.exe and use that
to start the program later.
● In DPMiko select the button "Datenexport MIOne" [MIOne data export].
50 / 100
Note
A country-specific sample data export can only be started on the herd
management PC.
The IPC in the DairyRobot R9500 is only a display screen for MView. The
animal data is on the HM-PC.
up from the
Note
The button is also used for the DairyRobot R9500!
DP menu
"LKV-Kopplung
7821-9001-005
01. October 2019