Download  Print this page

Setup 2; File Number; Usb Connect - Sony DSC-R1 User's Manual / Troubleshooting

Digital still camera.
Hide thumbs

Advertisement

Setup 2

2
The default settings are marked with

File Number

Selects the method used to assign file numbers to images.
Series
Reset

USB Connect

Selects the USB mode to be used when connecting the camera to a computer or a PictBridge
compliant printer using the USB cable.
PictBridge
PTP
Mass Storage
Auto
For details on the operation
.
Assigns numbers to files in sequence even if the recording
folder or the recording medium is changed. (When the
replaced recording medium contains a file with a number
higher than the last assigned number, a number one higher
than the largest number is assigned.)
Starts from 0001 each time the folder is changed. (When the
recording folder contains a file, a number one higher than the
largest number is assigned.)
Connects the camera to a PictBridge compliant printer
(page 99).
When [PTP] (Picture Transfer Protocol) is set and the camera
is connected to a computer, the images in the recording folder
on the camera are copied to the computer. (Compatible with
Windows XP and Mac OS X.)
Establishes a Mass Storage connection between the camera
and a computer or other USB device (page 87).
The camera recognizes automatically and sets up
communication with a computer or PictBridge compliant
printer (pages 87 and 99).
• If the camera and a PictBridge compliant printer cannot be
connected when set to [Auto], change the setting to
[PictBridge].
• If the camera and a computer or other USB device cannot be
connected when set to [Auto], change the setting to [Mass
Storage].
page 32
t
81

Advertisement

Table of Contents

   Related Manuals for Sony DSC-R1

This manual is also suitable for:

Cyber-shot dsc-r1

Comments to this Manuals

Symbols: 0
Latest comments: