Stage 3: Connecting the camera
and your computer
USB cable (supplied)
1 To a USB connector
• With Windows XP, the AutoPlay wizard
appears on the desktop.
"USB Mode Mass Storage" appears on the
screen of the camera.
When a USB connection is established for
the first time, your computer automatically
runs a program to recognize the camera.
Wait for a while.
* During communication, the access indicators
turn red. Do not operate the computer until the
indicators turn white.
• Opening the "Memory Stick"/CF card cover
cancels the USB connection. Do not open the
"Memory Stick"/CF card cover during a USB
• If "USB Mode Mass Storage" does not appear,
set [USB Connect] to [Mass Storage] (page 81).
2 To the
Stage 4-A: Copying images to a
• For Windows 98/98SE/2000/Me, follow the
procedure explained in "Stage 4-B: Copying
images to a Computer" on page 88.
• For Windows XP, when the wizard screen does
not appear automatically, follow the procedure
explained in "Stage 4-B: Copying images to a
Computer" on page 88.
This section describes an example of
copying images to a "My Documents"
After making a USB connection in
Stage 3, click [Copy pictures to a
folder on my computer using
Microsoft Scanner and Camera
[OK] as the wizard
screen appears automatically on
The "Scanner and Camera Wizard"
The images saved on the recording
medium of the camera appear.