The resizing function does not work.
You cannot resize RAW data files.
You cannot display a DPOF (Print order) mark.
You cannot display DPOF (Print order) marks on RAW data files.
You do not know if the OS of your computer is compatible with the camera.
Check "Recommended computer environment" on page 84 for Windows, and page 95 for
You cannot install the USB driver.
In Windows 2000, log on as Administrator (authorized Administrators) (page 85).
Your computer does not recognize your camera.
Turn on the camera (
When the battery level is low, use the AC Adaptor (
Use the supplied USB cable (page 87).
Disconnect the USB cable from both the computer and the camera, and connect it again
firmly. Make sure that "USB Mode Mass Storage" is displayed (page 87).
Set [USB Connect] to [Mass Storage] in the
Disconnect all equipment other than the camera, the keyboard and the mouse from the USB
connectors of your computer.
Connect the camera directly to your computer without passing through a USB hub or other
device (page 87).
The USB driver is not installed. Install the USB driver (page 85).
Your computer does not properly recognize the device because you connected the camera and
your computer with the USB cable before you installed the "USB Driver" from the supplied
CD-ROM. Delete the erroneously recognized device from your computer, then install the
USB driver (see the next item).
The "Removable disk" icon does not appear on the computer screen when you
connect your computer to the camera.
Follow the procedure below to install the USB driver again. The following procedure is for a
1 Right-click [My Computer] to display the menu, then click [Properties].
The "System Properties" screen appears.
2 Click [Hardware]
For Windows 98/98SE/Me, click the [Device Manager] tab.
The "Device Manager" appears.
3 Right-click [
The device is deleted.
step 2 in "Read This First").
Sony DSC], then click [Uninstall]
step 1 in "Read This First").
(Setup) menu (page 81).