Sony DSC-R1 User's Manual / Troubleshooting page 120

Macro is invalid
This appears when you select the macro
•
mode with
(Landscape mode) selected in the
Scene mode. In this case, the macro
function is invalid.
Manual focus is invalid
When the mode dial is set to
•
the FOCUS switch to MANUAL.
FramingMode is invalid
In the manual focus mode, even if you
•
set to the FRAMING mode, the
PREVIEW mode is activated instead.
No file in this folder
No images have been recorded in this
•
folder.
You did not operate correctly when
•
copying images from your computer
(page 92).
Folder error
A folder with the same first three digit
•
number already exists on the recording
medium (For example: 123MSDCF and
123ABCDE). Select other folders, or
create a new folder (page 76).
Cannot create more folders
The folder with a name beginning with
•
"999" exists on the recording medium.
You cannot create any folders if this is
the case.
Cannot record
The camera cannot record images in the
•
selected folder. Select a different folder
(page 77).
120
(Twilight mode) or
, set
File error
An error occurred while playing back
•
the image.
File protect
Release the protection (page 67).
•
Image size over
You are playing back an image of a size
•
that cannot be played back on your
camera.
Invalid operation
You are playing back a file that was
•
created on equipment other than this
camera.
(Vibration warning indicator)
Camera shake may occur due to
•
insufficient light. Use the flash, mount
the camera on a tripod, or otherwise
secure the camera in place.
Enable printer to connect
[USB Connect] is set to [PictBridge],
•
however the camera is connected to a
non-PictBridge compliant device.
Check the device.
The connection is not established.
•
Disconnect and connect the USB cable
again. If an error message is indicated
on the printer, refer to the operating
instructions supplied with the printer.
Connect to PictBridge device
You tried to print images before the
•
printer connection was established.
Connect to a PictBridge compliant
printer.