Controller Setup - Omron sysmac NJ Series Connection Manual

9.2. Controller Setup

Set up Controller using the project file.
9.2.1. Importing the Project File
Import the project file to Sysmac Studio.
1
Select Import from the File
Menu.
2
The Import file Dialog Box is
displayed,
Select
P653_NJ_EIP_OMRON_ZW-70
00_EV100.csm2 (project file)
and click Open.
*Obtain the project file from
OMRON.
3
The dialog box on the right is
displayed. Check the contents
and click No.
4
The P653_NJ_EIP_OMRON_
ZW-7000_EV100 project is
displayed.
*If an error message is
displayed stating "Failed to
Load Descendants", change
the version of Sysmac Studio
to the version specified in 5.2.
Device Configuration or to a
higher version.
9．Appendix: Procedure Using the Project File
50