Omron sysmac NJ Series Connection Manual page 54

Machine automation controller, displacement sensor

Hide thumbs Also See for sysmac NJ Series:

Table of Contents

Select Change Device from the

Controller Menu.

The Change Device Dialog Box

is displayed.

Check that the Device and the

Version Fields are set as shown

on the right.

Click Cancel.

*If the settings are different,

select the setting items from

the pull-down list, and click OK.

If you changed the settings in

step 6, the Build Dialog Box is

displayed. Check the contents

and click Yes.

9．Appendix: Procedure Using the Project File

Table of Contents