Rebuilding The Wheel [Road]; Putting On The Spokes On The Front Wheel - DT SWISS SPLINE ROAD 2014 RC 28 Technical Manual

5.7

Rebuilding the Wheel [ROAD]

Preparatory Steps
All spokes are available in the correct lengths.

5.7.1 Putting on the Spokes on the Front Wheel

1. Slide all spokes through the spoke holes on the
first side of the hub.
2. Slide all spokes through the spoke holes on the se-
cond side of the hub.
3. Connect the «spoke tree» to the rim (see Kap.5.7.3, S.69).
®
SPLINE Technical Manual 67