Putting on the Nipple [SPLINE ONE Wheels]
®
Attaching of a nipple on a conventional SPLINE wheel, see
Wheels].
NOTE
Caution!
SPLINE ONE wheels must only be build with DT Swiss Squorx nipples and special washers (PHR washers).
1. Grease the contact surface of the PHR washer and
the Squorx nipple.
2. Slide the PHR washer onto the nipple.
3. Put the spoke through the hub.
4. Screw the Squorx nipple onto the spoke.
5. Check, if the PHR washer is positioned correctly
and fits correctly within the radius of the rim
Putting on the Nipple [Conventional SPLINE®
®
SPLINE
Technical Manual
57