6. Slide a new spring (fig. 4-2/10) onto the bearing
shell (fig. 4-2/12).
The spring must not be damaged while mounting!
7. Slide the spring (fig. 4-2/10) onto the pawls
(fig. 4-2/9).
8. Check, if the spring sits inside the groove over the
complete circumference.
9. Check, if the pawls can be moved.
10. Grease the pawls (fig. 4-2/9) slightly using multi-
purpose grease.
11. Grease the bearing generous.
®
SPLINE
Technical Manual
35