Introduction; Support; Product Description; Finding The Charging Station - Husqvarna AUTOMOWER 310 Operator's Manual

1.1 Introduction

Serial number:
PIN code:
The serial number is on the product rating plate and on the product registration key.
• Use the product registration key and the serial number to register your product on www.husqvarna.com.

1.2 Support

For support about the Husqvarna product, speak to your
servicing dealer.

1.3 Product description

Note: Husqvarna regularly updates the appearance and
function of the products. Refer to
The product is a robotic lawn mower. The product has a
battery power source and cuts the grass automatically.
Collection of grass is not necessary.
The operator selects the operation settings with the keys
on the keypad.
The display shows the selected and possible operation
settings, and the operation mode of the product.
The boundary wire and the guide wire controls the
movement of the product within the working area.

1.4 Finding the charging station

The robotic lawnmower can be set to search for the
charging station in up to 3 different ways. The robotic
lawnmower automatically combines these 3 search
methods to locate the charging station as fast as
possible, but also to avoid as much tracks forming as
possible.
Using the manual settings options, the 3 search
methods can be combined to optimize the search for the
shape of the garden in question, see
page 9 .
1.4.1 Search method 1 - Irregular
Irregular search method means that the robotic
lawnmower operates irregularly until it gets close to the
charging station.
The benefit with this search method is that there is no
risk of tracks on the lawn from the robotic lawnmower.
The disadvantage is that search times can be somewhat
long.
840 - 001 -
1 Introduction
Support on page 3 .
Installation on
1.4.2 Search method 2 - Follow guide wire
Follow guide wire means that the robotic lawnmower
operates irregularly until it reaches the guide wire. Then
the robotic lawnmower follows the guide wire to the
charging station.
The guide wire is a wire that is laid from the charging
station towards, for instance, a remote part of the
working area or through a narrow passage. The guide
wire is then connected with the boundary loop. See
Installation of the guide wire on page 17 .
This search method makes it easier for the robotic
lawnmower to find the charging station despite many or
large islands, narrow passages or steep slopes.
The benefit of this search method is shorter search
times.
1.4.3 Search method 3 - Follow boundary wire
Follow boundary wire means that the robotic lawnmower
operates irregularly until it reaches the boundary loop.
Then it follows the boundary loop to the charging station.
The robotic lawnmower randomly selects to travel
clockwise or anticlockwise.
Introduction - 3