Dwells/Delays; Multiplier; Back/Cancel; Enter - ID Technology 252 Operator / Technical Manual

4.2.11 Dwells/Delays

Press the Dwells/Delays icon to access the screen for timing of specified actions or
signals.
The individual Dwell and Delay icons and settings are examined in the Application Setup
section.

4.2.12 Multiplier

When changing the times in the Dwells and Delays section, there are two features to take
note of:
Pressing the Multiplier icon when changing a time value will change the amount that
each press of the up or down arrows will alter the value. The default when entering a
screen is a jump of one. Pressing the icon once changes the jump value to ten. Pressing
the icon a second time, the jump value will change to one hundred. Pressing the icon for
a third time results in a change of one thousand. Pressing the icon again returns the jump
value to single digits.
Changing the values affect the machine while it is running. For example, while the line is
running, increasing or decreasing the Delay Apply value will affect the label position on
the product in real time. Once the desired value is displayed, pressing the enter
will set the value as current. If you do not wish to keep the change, simply press the back
icon to discard the change and return to the previous value.
When the home screen is displayed, the multiplier key is used to adjust the
display contrast.

4.2.13 Back/Cancel

The Back icon will cancel any unsaved changes and display the previous screen each
time it is pressed.

4.2.14 Enter

The Enter icon is used to select the item or save the value chosen.
Operators/Technical Manual
38
Model 252
Label Printer/Applicator
icon