Label Roll Size; Label Style; Standard Label Size; Environmental Requirements - ID Technology 252 Operator / Technical Manual

1.6 Label Roll Size

14" OD x 3" ID

1.7 Label Style

Pressure sensitive Die cut, waste removed, outside wound, 1/8" minimum gap in the
running direction, 1/16" precision edge trim with no splices.

1.8 Standard Label Size

Label sizes are print engine dependent. Refer to the manual for the specific print engine
installed.

1.9 Environmental Requirements

Temperature: 32°F - 104°F
Relative Humidity: 15%-85% (non-condensing)
See the manual for the specific print engine installed for additional individual
requirements.

1.10 Noise

Noise emissions are dependent upon method of operation and settings. Noise is typically
less than 76dBA. Hearing protection is not required by OSHA guidelines, but ID
Technology recommends the use of hearing protection during periods of prolonged
exposure.

1.11 Safety

The Model 252 can be used in a variety of applications and in conjunction with other
machinery. The 252 has been designed and evaluated to comply with a number of
industry and international directives. Due to the variety of possible uses of the Model
252, installation of the Model 252 may change the criteria for compliance. Once
installed, it is the responsibility of the purchaser to evaluate and implement measures to
return the Model 252 and the host system to compliance. Evaluation should include but
is not limited to;
•
Power and air cutoffs
•
Emergency stops
•
Electrical ground protection
•
Guarding and interlocks
•
Environmental enclosures
Label Printer/Applicator
Operators/Technical Manual
2
Model 252