SYSMEX CA-500 Service Manual page 235

(3) Move the sample probe unit by hand to a place where it is easy to operate.
Remove the sample probe retainer.
CAUTION:
(4) Raise the sample probe by hand to a place where it is easy to operate.
Remove the catcher retainer.
CAUTION:
CA-500 Series S/M
Sample Probe Retainer
Figure B-3: Removing the Sample Probe Retainer
• Unless the retainer is removed, the instrument cannot operate.
Figure B-4: Removing the Catch Retainer
• Unless the retainer is removed, the instrument cannot operate.
Catcher Retainer
B-4 Revised December 2001 8