Rear Panel - Safety Vision OBSERVER 4816-NVR Hardware User's Manual

5

Rear Panel

1 LAN Port (RJ45)
Connection for the POE Smart Switch
IP camera hub. The Smart Switch MUST be connected to
the LAN port. This port can be used to connect a laptop
to configure the NVR.
Default IP address: 10.100.100.1/24
2 WAN Port (RJ45)
Connection for optional network
accessories.
Default IP address: 192.168.1.100/24
3 IPC Ports
Connections for up to 16 network IP cameras.
4 Panel Port
Connection for optional CP4-series monitors.
5 VGA Port
Connection for optional monitor.
6 Diagnostic Port
Service Technician use
7 GPS Antenna Port
Connection for the external
antenna for the internal GPS module.
OBSERVER ™ 4816 HVR HARDWARE USER GUIDE
only.
8 WiFi Antenna Connector (SMA)
external antenna for the internal WiFi module.
9 Cellular Antenna Connector (SMA)
Development.
10 USB Port
Connection for optional USB accessories.
11 Sensor Port
Connection for the Alarm Extender.
12 Serial Port
Connection for the I/O Hub.
13 eSATA Port
Connection for optional external
equipment.
14 Power Port
Connection for the main power harness.
Connection to an
Under