Engine Tune-Up; Inspection Of Engine Coolant; Inspection Of Engine Oil; Inspection Of Air Filter - Toyota 3F-E Repair Manual Supplement

EM-8
Recommended Viscosity (SAE):
15W-40 20W-40
10W-30 10W-40
5W-30
°F -20 0 20 40
-7
°C -29 -18 4
TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE
ENGINE MECHANICAL —

ENGINE TUNE-UP

I NSPECTION OF ENGINE COOLANT
1. CHECK ENGINE COOLANT LEVEL AT RESERVE
2. CHECK ENGINE COOLANT QUALITY
I NSPECTION OF ENGINE OIL
1. CHECK ENGINE OIL QUALITY
20W-503
10W-50
60 80 1 00
1 6 27 38
LUO311
2. CHECK ENGINE OIL LEVEL
I NSPECTION OF AIR FILTER
I NSPECT AIR FILTER
Engine Tune-up
TANK
The coolant level should be between the "LOW" and
"FULL" lines.
If low, check for leaks and add coolant up to the "FULL"
li ne.
There should not be any excessive rust deposits or scales
around the radiator cap or radiator filler hole, and the
coolant should be free from oil.
If excessively dirty, replace the coolant.
Check the oil for deterioration, entry of water, discoloring
or thinning.
If the quality is poor, replace the oil.
Use API grade SC, SD, SE, SF or better and recom-
mended viscosity oil.
The oil level should be between the
the dipstick.
If low, check for leakage and add oil up to the "F" mark.
(a) Visually check that the air cleaner element is not
excessively dirty, damaged or oily.
If necessary, replace the air cleaner element.
(b) Clean the element with compressed air.
First blow from inside thoroughly, then blow off the out-
side of the element.
"L" and "F" marks on