Inspect Charging Circuit With Load - Toyota 3F-E Repair Manual Supplement

CH-6
g 10
6
12 14
D
ti
V
CHARGING SYSTEM — On-Vehicle Inspection
• If the voltage reading is more than standard
76
• If the voltage reading is less than standard
78
CH0067

7. INSPECT CHARGING CIRCUIT WITH LOAD

With the engine running at 2,000 rpm, turn on the
(a)
high beam headlights and place the heater blower
switch at "HI".
(b) Check the reading on the ammeter.
Standard amperage: 30 A or more
If the ammeter reading is less than 30 A, repair the alter-
nator. (See page CH-7)
HINT: When the battery is fully charged, the indication
will sometimes be less than 30 A.
voltage, replace the IC regulator.
voltage, check the alternator.
I '