AMQ ACTIV DT Riser Assembly Manual page 7

ADJUSTING VESA MOUNT TENSION
Step 1
Remove the M4X10 screw to
release the VESA mount.
Step 3
Use a 13mm wrench to adjust the M8 screw
on the VESA mount for appropriate tension
— clockwise to increase tension (for larger
monitors) and counterclockwise to decrease
tension (smaller monitors).
ACTIV DT RISER ASSEMBLY GUIDE | 7
M4X10
Step 2
Take off rubber cover on the VESA
mount to expose the M8 screw.
amqsolutions.com